FBSM768 ACETIC MIDDLE GRADE SILICONE SEALANT
Product Description:
One component, acetic, room temperature curing, low modulus, normal curing speed, good bonding and sealing to different materials.
Application:
1. For assembling of doors and windows;
2. For indoor decoration: filling, sealing, jointing.
3. For bonding and sealing of glass, glass fiber, rubber, wood, ceramics,
metal, plastic, fiber and other greaseless base materials.
Features & Benefits
1. One-component, acetic cured, RTV, low-modulus;
2. Easy to use, fast dry, good adhesion to many building materials;
3. Good aging-resistant ability and flexible;
4. Non-sagging, low shrinkage, good UV resistance & insulation properties;
5. No primer is required when sealing joints in glass, ceramics and vitreous surfaces;
Instruction of Use
1. Get rid of the rust, oil, or any dirty on the operation surfaces, to make
sure it completely clean and dry;
2. Cut nozzle to desired size and smoothly extrudes sealant to joint areas;
3. If further sealing needed, should finish operation within 5 minutes. Wipe
off the surplus sealant with dry tissue.
4. After completely solidify, amend by knife.
NOTICES
1. Unsuitable for curtain wall structural adhesive;
2. Unsuitable for the airproof location, because it is required to absorb moisture
in air to cure for the sealant;
3. Unsuitable for the frosty or moist surface;
4. Unsuitable for the continually soggy place;
5. Can't be used if the temperature is below 4℃ or above 50℃ on the surface
of the material.
6. Not suitable for marble, coated glass, copper, iron, lead, galvanized material.
Color:
Clear, black, milk white, silver grey( upon customer’s requests)
Storage & Shelf life
1. The product is nonflammable. Keep dry and shade, air tight during storage.
2. Shelf life: 12 months. Stored at 5-27℃ dry and shade place(relative humidity below 50%).
3. After expiry date, the product can also be used if tested qualified.
Packing:
260ml/pc,24pcs/ctn
280ml/pc, 24pcs/ctn
300ml/pc, 24pcs/ctn
Carton Size: 30*20*24.5cm